DY-E501 5-MINUTE CLEAR EPOXY RESIN AB ADHESIVE

Specifications

Initial Cure Time: 5-10 Minutes

Package:

50ml/pair; 10pairs/small box; 60pairs/big box

400ml/pair; 6pairs/small box; 24pairs/big box

2kg/pair; 6pairs/big box

5kg/pair; 3pairs/big box

15kg/barrel; 30kg/Pairs

Shelf Life: 12 months

Alibaba

Back to list

1. Properties

DY-E501 5-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is a two-component adhesive with the characteristics of low odour, eco-friendly, non-toxic and good insulation, super high strength, and resistance to oil, water, acid and alkali.

2. Applications

DY-E501 5-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is applicable to jewelry, electronic appliances, medical equipment, and fitness equipment. It is used to self -bond or inter-bond metal, glass, jade, crystal, plastic and ceramics.

3. Directions

Surfaces of the substrates must be cleaned, and dried.
Mix components A and B at the ratio of 1∶1 in weight. Initial cure can be reached within 5 minutes (25℃), and the bonded materials can be used after 12 hours.
After the materials are bonded, mechanical treatment is needed to meet the the bonding requirements so as not to affect its effect.
The adhesive is a bit viscous, which is normal and does not affect the bonding effect.

4. Storage & Warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

The adhesive is irritable to skin and eyes.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

5. Parameters

Color	Viscosity(CPS)(25℃)	Mixing Ratio	Work Time(25℃/100g)
A:Clear	A:10000-15000	1:1	5 Minutes
B:Clear	B:10000-15000	1:1	5 Minutes
Cure Time(25℃/100g)	Tensile Shear Strength(St-St)	Heat Resistance(℃)	Shelf Life(25℃)
Touch dry:5-10 minutes	≥8 Mpa	-60 to +100	12 months
Full Cure:12 hours	≥8 Mpa	-60 to +100	12 months