DY-E506 60-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is a two-component adhesive with the characteristics of low odour, eco-friendly, non-toxic and good insulation, resistance to oil, water, acid and alkali, and high bonding strength.

2. Applications

DY-E506 60-MINUTE CLEAR EPOXY RESIN AB ADHESIVE is suitable for LED lightings, mechanical equipment, instruments and meters, electronic appliances, and medical equipment. It is used to self -bond or inter-bond ceramics, glass, metal, and plastic.

3. Directions

Surfaces of the substrates must be cleaned, and dried.
Mix components A and B at the ratio of 1∶1 in weight. Initial cure can be reached within 60 minutes (25℃), and the bonded materials can be used after 24 hours.
After the materials are bonded, mechanical treatment is needed to meet the the bonding requirements so as not to affect its effect.
The adhesive is a bit viscous, which is normal and does not affect the bonding effect.

4. Storage & Warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

The adhesive is irritable to skin and eyes.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

5. Parameters

Color	Viscosity(CPS)(25℃)	Mixing Ratio	Work Time(25℃/100g)
A:Clear	A:10000-15000	1:1	30 Minutes
B:Clear	B:10000-15000	1:1	30 Minutes
Cure Time(25℃/100g)	Tensile Shear Strength(St-St)	Heat Resistance(℃)	Shelf Life(25℃)
Touch dry:60 minutes	≥15 Mpa	-60 to +100	12 months
Full Cure:12 hours	≥15 Mpa	-60 to +100	12 months