DY-J8833 SPECIAL ADGESIVE FOR ELEVATOR CAGES

Specifications

Initial Cure Time: 5-10 Minutes

Packages:

400ml/pair; 6pairs/small box; 24pairs/big box

2kg/pair; 6pairs/big box

5kg/pair; 3pairs/big box

Shelf Life: 6 months

Alibaba

Back to list

1. Properties

DY-J8833 ADGESIVE for ELEVATOR CAGES, a modified acrylate AB glue, is characterized with high strength, high performance and impact resistance. It has the following advantages: High lap shear and peel strength; Excellent thixotropic property; Not easy to flow; Easy to use.

2. Applications

DY-J8833 ADGESIVE for ELEVATOR CAGES is not only suitable for elevator cages and other stainless steel with reinforcing ribs, but also for bonding metal, plastics and rubber.

3. Directions

Clean the contaminants like water, dusts, oil etc. on the surface of the substrate and keep it clean, dry and smooth.
Mix components A and B at the ratio of 1:1 in weight and apply the mixture onto the substrate to be bonded.
Press and rotate the substrates while bonding.
Initial curing in 5-10 minutes. It takes one hour and 24 hours to reach its use strength and maximum strength respectively.
DO NOT mix a great amount of adhesive at one time.

4. Storage & Warnings

Storage:

Store the adhesive in shady, dry, well-ventilated, damp-proofing places。
Store the adhesive at room temperature.
Keep away from any source of ignition.

Warnings:

The adhesive is irritable to skin and eyes.
Keep out of reach of children.
In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.

5. Parameters

Component	A Component	B Component
Appearance	green, viscous liquid	red, viscous liquid
Viscosity（cps/25℃）	8000-12000	8000-12000
density(g/cm3)	1.00±0.02	1.00±0.02
Solid content	100﹪
Cure time(25℃)	Initial cure: 5-10 minutes; full cure: 24 hours
Lap shear strength (Mpa)	≥20
Shelf life(25℃)	6 months